Sharkit 1/72 Edgley EA-7 Optica: Part 2

At the end of my previous post in this build log, I had the basic colour scheme and much of the detailing in place. But there was a significant challenge ahead. Because I’d chosen to build the Optica that appeared in the cult-but-dire science fiction movie Slipstream.

"Slipstream" titleAnd I probably should have researched this a little better before I started work. When I started out on this project, I recalled the livery as being pale grey with random dark grey streaks, but when I rewatched the 4:3 pan-and-scan DVD which represents the film’s only English-language release, it became evident that the upper surfaces and under-wings were patterned with a stylized pattern of feathers.

Edgley Optica "Slipstream" aircraftSliptream Optica upper sideSliptream Optica undersideOops. So it was time to start printing some custom decals, producing my best “artist’s impression” of the patterns on the original aircraft, using only the blurry views available from the DVD.

Here’s an early test printing of the planned decals. (Given that I was going to use up an entire sheet of Experts-Choice decal paper, I planned to print multiple spares on that sheet.)

Sharkit Optica decal sheet test
Click to enlarge

I got the shape for the wings by scanning and enlarging the plans from the kit to match the size of the model, and then sketching my patterns on top. The nacelle pattern was tricky, because the nacelle curves in two dimensions. I ended up measuring the nacelle circumference at various points along its length, drawing and patterning a narrow polygon with those proportions, and applying multiple copies around the curve of the nacelle. I also sketched a version of the peculiar symbol that is visible on the tail in some scenes. My first attempt (above) was too small, and the final decal sheet included an enlarged version.

Once I was as happy as I could be that everything would fit together, I printed the decal paper and sealed it with Microscale Liquid Decal Film, thinned half-and-half with ethanol-based surgical spirit and airbrushed on in a thin layer.

Here’s the result:

Sharkit Optica decals, upper surface
Click to enlarge
Sharkit Optica decals, under surface
Click to enlarge

After that, I placed the cockpit/engine assembly into the fan nacelle, and added the wheels. The engine needed a little more scratch building to provide the four stator struts that hold it in place in the real aircraft—the kit has it levitating within the nacelle.

Sharkit Optica assembled 3
Click to enlarge
Sharkit Optica engine struts
Click to enlarge
Sharkit Optica assembled 2
Click to enlarge

The only thing remaining was to add a few more details constructed from styrene and fine brass wire—various aerials, a pitot tube, flap levers—and to slip a fine transparent rod under the rear of the nacelle to stop the thing toppling over backwards.

Here’s the final result:

Sharkit Optica completed 2
Click to enlarge
Sharkit Optica completed 1
Click to enlarge
Sharkit Optica completed 8
Click to enlarge
Sharkit Optica completed 7
Click to enlarge
Sharkit Optica completed 4
Click to enlarge
Sharkit Optica completed 6
Click to enlarge
Sharkit Optica completed 3
Click to enlarge
Sharkit Optica completed 5
Click to enlarge

I also acquired a Coastal Kits “abandoned airfield” display base, and tried a few poses on that:

Sharkit Optica completed 13
Click to enlarge
Sharkit Optica completed 12
Click to enlarge
Sharkit Optica completed 11
Click to enlarge
Sharkit Optica completed 10
Click to enlarge
Sharkit Optica completed 9
Click to enlarge

All in all, a tricky kit to build—in part because of how basic the resin parts are, and also because of the poor fit of the vacuform canopy. But mainly because I was using the kit as a basis for an aircraft it wasn’t intended to represent.

4 thoughts on “Sharkit 1/72 Edgley EA-7 Optica: Part 2”

  1. Excellent job on this challenging kit. I’ve recently picked up the new Avis 1/72 Optica – injection-moulded with photo etch and paint masks, which is nice. Now I need to watch Slipstream (which I’ve never seen!) and decide what scheme to build…

  2. Thanks. I picked up the Sharkit kit years ago, before Avis started work on their own Optica kit. I now have the Avis version in my stash, which I’ll get around to some day.

  3. WOW! Kool build. Personally, I want to scratchbuild this plane. Just a small question… Would it be possible to get a copy of your artwork for the decals? I’d only mod and use it on my build.

    1. Thanks. You can find my decal sheet here. It’s a png file with a transparency channel and resolution of 600dpi.
      Good luck.

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.